Jigsaw Power Tool Frequently Asked Questions – FAQs

The movement of blades is different in both of these jigsaws. That is what makes them different from each other. In an orbital jigsaw, the movement of the blade is a forward upswing in the workpiece and afterward goes a backward downstroke as it resets itself. On the other hand, a regular jigsaw shows an up and down movement while cutting the workpiece.

It depends upon your use. If you are a professional, you will need to pay attention to every little thing. That includes the

• 700 W of power rating
• Ergonomic design
• Extraction system
• Higher stroke rate
• Quick blade change option

It is common for jigsaw blades to bend while cutting. Therefore, they are not appropriate for straight cuts. So if you want a fast and straight cut, you need to use a table saw. If you are using a jigsaw, this clearly means that you will have a beveled edge and not a straight cut.

You cannot get an entirely straight cut through the use of a jigsaw. But you can pay more attention to the cutting technique and make the cut precisely. You will have a broad range of parts in the jigsaws, which you can use in replacement to each other. Thus, you can get a straight line after the careful choice of tools and blades.

Cutting a circle by using the jigsaw is quite easy. You will have to draw the circle with an inch offset. This will provide you some room for edges. You can also start by making the hole at the point where the blade will make a start. Afterward, you can start cutting the workpiece in a circular direction.

The best saw that will provide you with a fine and straight cut line is the circular saw. Circular saws are not anything like their name. They are called circular because their blade has a circular structure.

The best jigsaw for the money is the “Bosch JS470E Jigsaw”. It provides you with the best blade for fine cutting. Moreover, you will get to have the precise cutting and quick results through its use.

If you want the best all purpose saw, you should get yourself the “DeWalt DWS780”. It has been equipped with all the necessary features that you will need. Besides that, you will also get fine quality cuts through it.

The best use for jigsaws is the curvy cuttings. If you want to make a curvy pattern or want to have different cutting shapes, you should use a jigsaw. The sharp teeth of the blades make a clean cut without sharp edges. This makes it best for DIY projects also.

Orbital settings allow you to move the jigsaw in a circular motion without any stop and pause. Thus, you get a faster speed to cut the circular shape. You have to reduce the orbital action to get the finest quality cut.

It is not appropriate to say which one is better, circular or jigsaw. Both of them have their specific uses. For artistic cuts and curvy shapes, you should choose a jigsaw. The blade of the jigsaw gets curved while you move it along the cutting line. On the other hand, a circular saw is completely opposite of its name. It gives you the perfect straight cut.

A Brushless jigsaw is the one that has a brushless motor. And this type of motor is suitable to enhance the unction of any tool. You can adjust the torque, speed of the blade and the power supply. The power supply is managed to depend upon the material on which the tool is being used and its density.

If you do not have a jigsaw, you can use any other of these saws for cutting workpieces.

• Scroll saw
• Hack saw
• Band saw
• Coping saw
• Reciprocating saw
• Fret saw
• Rotary saw

Brushless motors provide you with power control, better torque and increased speed. The power control feature will manage the other functions depending upon the firmness and thickness of the workpiece. Therefore, they are definitely better than the other ones.

A blade piece that gets locked in the jigsaw clamp is called a shank. There are two common types of shanks U-type and T-type.

T shank is called tang shank, which is widely used because of the ease of switching the blades. While U shank is the universal shank that was previously used in the jigsaws.

The average time period for which the brushless motor lasts is tens of thousands of hours. Therefore, these motors will last for a really long time. The major problem in brushed motors is that after around 3000 hours (maximum), the brushes get damaged. Thus, you have to change the motor.

Brushless motors have a high resistance that goes higher than 100 kilo-ohms. So if you are going to check the type of motor, start from around 100 mV. After that, you can measure the resistance of the motors and know if it is brushed or brushless.

The best thickness to cut through the jigsaws is one to half an inch. Besides that, jigsaws are best to be used in softwood. And if you are cutting a hardwood, they can cut up to 3/4th of an inch.

Related Jigsaw Reviews & Buyer’s Guide: